Intelix DIGI-44B Manuel d'utilisateur télécharger pdf (Page 12)

DIGI-44B Installation Guide

IP Address Assignment

The DIGI-44B ships from the factory with a default IP address of 192.168.0.178. You can change this IP

address to a different static IP address or to DHCP using the DIGI-44B Docklight configuration file, which

can be found on the Intelix website.

Static IP assignment via RS232

The Static IP address can be changed using RS232

1. Download Docklight and the DIGI-44B from the Intelix website.

2. Connect the included USB -> RS232 adapter to an open USB port on your computer, or if you have

a serial port, connect a straight through serial cable. When using the

USB->RS232 adapter for the first time, device drivers should be automatically installed.

3. Open the Docklight Configuration File.

4. Confirm the Docklight communication settings

(Docklight -> Tools -> Project Settings) match the

device. 9600/8/n/1 on the COM port named USB Serial

Port (or COM 1 if using your computer’s serial port

instead of the adapter.

5. Start Communication.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Pas de commentaire

Intelix DIGI-44B Manuel d'utilisateur Page 12