Specifications
Specifications subject to change without notice.
Maximum Distance* Digital audio only: 600 feet
480i/p video only: 1,000 feet
480i/p video with digital audio: 600 feet
720p video only: 500 feet
720p video with digital audio: 500 feet
1080i/p video only: 500 feet
1080i/p video with digital audio: 500 feet
Maximum Video Input 1.1 Vp-p
Bandwidth Video: 60 MHz, 3 dB roll off
Digital audio: 25 MHz, 1 dB roll off
Video Insertion Loss 0.1 dB for 0.1 MHz; gradually increasing to 2.5 dB over the
frequency range
Audio Insertion Loss Less than 1 dB over the frequency range
Return Loss Greater than 15 dB over the frequency range
Video Common Mode Rejection -55 dB at 0.1 MHz; gradually increasing to -20 dB at 60 MHz
Audio Common Mode Rejection -50 dB at 0.1 MHz; gradually increasing to -30 dB at 25 MHz
Unshielded Twisted Pair Maximum capacitance: 20 pf/foot
Cabling Specifications Impedance: 100 ohms @ 1 MHz
(24 gauge or lower solid Attenuation: 6.6 dB/1000 ft. @ 1 MHz
copper) Cat 5, Cat 5e, Cat 6, Cat 7 compatible
Connectors Three (3) female RCA and one (1) gold-plated female coax to one
(1) RJ45
RJ45 Pinout Red (Pr): 7 & 8, pair 4
Green (Y): 3 & 6, pair 3
Blue (Pb): 1 & 2, pair 2
Digital Audio: 4 & 5, pair 1
Temperature Operating: 32 to 131 F (0 to 55 C)
Storage: -4 to 185 F (-20 to 85 C)
Humidity: up to 95%
Enclosure Front: standard decora wallplate
Rear: metal casing
Dimensions 4.0” x 1.4” x 1.7”
Weight 0.2 lbs (3.2 oz.)
Ordering Information AVO-V3AD-WP-F: single AVO-V3AD-WP-F balun in bulk
packaging
Warranty 2 years
* Distances and picture quality may be affected by cable grade, cable quality, source and destination
equipment, RF and electrical interference, and cable patches. Intelix specifications are based on straight-
through cabling with standard-grade Cat 5.
Contact Information
Intelix
2222 Pleasant View Road
Middleton, WI 53562
Toll-free: 866-4-MATMIX
Phone: 608-831-0880
Fax: 608-831-1833
www.intelix.com
Intelix AVO-V3AD-WP-F Audio/Video Balun
Installation ManualInstallation Manual
Installation ManualInstallation Manual
Installation Manual
The Intelix AVO-V3AD-WP-F wall-plate balun transmits one high-
definition (HDTV) component video (YPbPr or RGB) signal and
one digital audio signal up to 1,000 feet over inexpensive structured
cabling, such as Cat 5. Used in pairs or with the rack-mountable
Intelix AVO-V3AD-F balun, the AVO-V3AD-WP-F is ideal in
residential, corporate, educational, and hospitality environments.
The Intelix AvoCat Series of baluns is the ideal solution for
sending audio and video over structured cabling. When signal qual-
ity matters, choose Intelix.
To install an AVO-V3AD-WP-F balun, perform the following steps:
1. Identify the pin configuration of the baluns. Three (3) twisted pairs are required
for video and one (1) twisted pair is required for digital audio. The pin
configuration follows the EIA/TIA 568A/B standard. The Intelix AVO-V3AD-
WP-F balun is reverse polarity sensitive. Please ensure that wiring is straight-
through.
2. Connect one AVO-V3AD-WP-F balun to the component video coaxial cable
output of the video source using three RCA video cables. Ensure the color codes of
the AVO-V3AD-WP-F and video equipment match.
3. Connect a second AVO-V3AD-WP-F wallplate balun or a compatible AVO-
V3AD-F rack-mountable balun to the component video coaxial cable input of the
receiver(s) at the remote end using three RCA video cables.
4. Complete the connection between the two baluns using standard Cat 5 twisted
pair cable. Verify the Cat 5 is terminated with RJ45 connectors on both ends.
Ensure that there are no split pairs or taps.
5. If digital audio is to be connected (optional), connect an RCA lead between the
balun and the digital audio equipment at both ends.
6. Power-on the component video equipment. Check the image quality and refer to
troubleshooting if the image quality is unsatisfactory.
Installation
Caution: Do not attempt to open the balun housing. There are no user-serviceable parts
inside the AVO-V3AD-WP-F. Opening the unit will void your
warranty.
Caution: Do not mount the balun over equipment ventilation openings. Covering the
openings may cause the equipment to overheat.
AvoCat
Series
Caution: Do not connect the AVO-V3AD-WP-F to a telecommunication outlet
wired to unrelated equipment. Making such a connection may damage
the equipment and/or balun. Please ensure all wiring is “straight-
through.”
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels